Code: 05-900
Description: DADF Jam 0
Causes: The lead edge of the document failed to actuate the registration sensor within the correct time.
Remedy: 1. Open the DADF door assembly . Remove all jammed paper. 2. Check the document path for damage or obstructions. 3. Check the pickup roll assembly . If necessary, install a new pickup roll assembly . 4. Check the retard pad assembly . If necessary, install a new retard pad assembly . 5. Check that the registration sensor actuator moves freely and is not damaged. 6. Enter dC330 code 05-130. Check the registration sensor (Q05-130) . 7. Check the wiring between the registration sensor and CN1 on the DADF PWB. If necessary, install a new registration sensor . 8. Enter dC330 code 05-201. Check that the DADF scan motor (MOT05-200) runs. 9. Check the wiring between the DADF scan motor and CN9 on the DADF PWB. If necessary, install a new DADF scan motor . 10. While the DADF scan motor runs, stack the code 05-300 to energize the pick up solenoid (SOL05-300). Check that the pickup roll rotates. 11. Check the wiring between the pick up solenoid and CN7 on the DADF PWB. If necessary, install a new pick up solenoid . 12. If necessary, install new components: • DADF PWB . • DADF drive assembly . • Document transport assembly .