Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 06-100, 06-200 — Xerox WorkCentre 3550

Code: 06-100, 06-200

Description: LSU Error
Causes: 06-100 The machine has detected that the LSU did not reach a ready state within the correct time. 06-200 The machine did not detect the laser beam within the correct time.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Enter dC330 codes 06-100 and 06-110. Check that the LSU motor is up to normal speed. NOTE: Code 06-110 will display low when the LSU motor runs at normal speed. 3. Check the wiring between the LSU and CN24 on the Main PWB. 4. Remove the print cartridge . Check that the LSU interlock switch actuator on the print cartridge is not damaged. 5. Check the LSU interlock switch . 6. Check the wiring between the LSU interlock switch and CN21 on the Main PWB. If necessary, install a new LSU interlock switch . 7. If necessary: • Install a new LSU . • Perform OF7 Main PWB Check RAP

← Xem tất cả mã lỗi Xerox WorkCentre 3550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie