Causes: The machine has detected a failure to feed from the bypass tray.
Remedy: 1. Open the front cover assembly . Check that the paper feed area at the bypass tray is clean. 2. Check the operation of the bypass paper empty sensor actuator . 3. Enter dC330 code 07-510. Check the bypass paper empty sensor (S07-510) . 4. Check the wiring between the bypass paper empty sensor and CN37 on the Main PWB. If necessary, install a new bypass paper empty sensor . 5. If necessary: a. Install a new bypass feed assembly . b. Perform OF7 Main PWB Check RAP.