Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-610 — Xerox WorkCentre 3550

Code: 08-610

Description: Duplex Jam 1
Causes: The lead edge of the document failed to actuate the registration sensor after the duplex jam 1 sensor within the correct time.
Remedy: 1. Open the rear cover assembly . Remove the duplex assembly , then remove all jammed paper. 2. Check the paper path for damage or obstructions. 3. Check that the registration sensor actuator moves freely and is not damaged. If necessary, install a new registration sensor actuator . 4. Enter dC330 code 08-500. Check the registration sensor (Q08-500). If necessary, install a new HVPS . NOTE: The registration sensor is mounted on the HVPS. 5. Enter dC330 code 04-300 to run the duplex motor (MOT04-300) . Check that the duplex drive gear rotates. 6. Check the wiring between the duplex motor and CN7 on the Connection PWB. Install new components as necessary . 7. Manually rotate the duplex drive belt . Check that the duplex drive rolls are clean and rotate freely. Install new components as necessary . 8. Install new components as necessary: • Duplex assembly . • Bypass feed assembly . • Connection PWB .

← Xem tất cả mã lỗi Xerox WorkCentre 3550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie