Causes: The machine has detected a mechanical fault with the CCD module.
Remedy: 1. Raise the DADF. Check that the scanner lock is completely unlocked. 2. Remove the scanner cover . 3. Check that the CCD module moves freely from left to right. 4. Check the wiring between the CCD home sensor and CN5 on the Main PWB. If necessary, install a new CCD home sensor . 5. Check the wiring between the scan motor and CN4 on the Main PWB. 6. If necessary: a. Install new components: • Scanner motor drive assembly . • CCD module . • Scanner assembly . b. Perform OF7 Main PWB Check RAP.