Code: 15-100 ... 15-500
Description: Scan to E-mail Faults
Causes: These are the faults displayed when the machine encounters scan to e-mail problems. The faults are listed in code order, together with any recommended action. Please note that service actions are limited.
Remedy: 15-100 Group Name has no Assigned Email Addresses No email address is assigned to the group name. Remove the group name from the ‘To:’ field or enter a valid email address. 15-110 Email Send Failed Email SMTP server returned an error during transmission. The SMTP server authentication may be supported but not enabled on the device or any 500 code is returned from the mail server. Resend the email. 15-120 Invalid Recipient Email Address The email address has either been restricted or is in the wrong format. Re-enter the email address. 15-130 Mail Too Large The machine is unable to split the mail and send it. This can occur when the machine is configured to send a maximum mail size. For example 1.0MB and the scanned mail page exceeds this size. Increase the mail size via CentreWare Internet Services. If the fault persists, increase the mail size allocation on the mail server. 15-140 Invalid Email Address The user has attempted to enter an invalid email ID. Examples are: • Spaces in the ID • Invalid starting character such as '.', '+', '_', '@' • More than one '@' 15-150 Group Not Available The user has attempted to enter an invalid group number. Confirm that the group is available and has mail addresses associated with it. 15-160 Memory Full The HDD is full during scan to email. 15-170 Memory Full The machine does not have enough memory to prepare the next job. 15-200 Network Controller Error A NIC error (SMTP). One of the following Simple Mail Transfer Protocol errors may have occurred: • SMTP_ENCODER_FAILURE. Error returned by NIC during SMTP encoding activity. • SMTP_MEMORY_FAILURE. Error returned by NIC for memory failure during SMTP operation. • SMTP_MISC_ERROR. Miscellaneous error returned by NIC during SMTP operation. Switch off the machine, then switch on the machine. Resend the email. 15-300 Network Connection Failure Any communication or network failure during SMTP or LDAP operations. Check the network connection. Switch off the machine, then switch on the machine. 15-310 Authentication Failure The user has attempted to enter an invalid user name or corresponding password. Enter a valid user name and password. 15-320 Mail Server Connection Failure The machine can not contact the SMTP server. Check the SMTP IP address or host name. Check that the SMTP port is open and working correctly. 15-330 DNS Connection Failure The machine cannot contact the Domain Name System to resolve the SMTP host name. Check that the DNS server is online. 15-340 Mail Exceed Server Support The maximum configured mail size exceeds the server limit. Reduce the mail size option. 15-400 LDAP Communication Failure The machine can not contact the LDAP server. Check the LDAP IP address or host name. Check that the LDAP port is correct and open. 15-410 LDAP Search Failed The LDAP server has returned an error during transmission. The LDAP server authentication may be supported but not enabled on the device or the maximum search results have been exceeded. Resend the email. 15-420 LDAP Search Timeout Exceeded The LDAP search timeout has been exceeded. Resend the email. 15-430 No Matching Entries in LDAP Directory The LDAP server cannot match the entry by user. Check the spelling of the LDAP entry, then resend the email. 15-500 Session Timeout The user has not touched a key within in the designated time frame. Resend the email. 15-510 Scan Error The machine has detected an error with the scanner. Check the scanner, refer to the 14-100 CCD Lock RAP. 15-520 Stop Pressed from MFP The user has cancelled the email job. 15-600 Authentication Required The mail server requires user authentication to be enabled. Enable user authentication. Refer to the System Administration Guide. 15-700 DNS Error The machine can not contact the DNS server or a DNS resolution failure has been detected. Check the DNS server setup or enter a valid email address. 15-800 Pop3 Error The machine has detected a POP3 protocol error or an error during a POP3 session. Enter a valid email address. 15-810 Pop3 Connection Failure The machine could not connect to the configured POP3 server. Check the POP3 server setup. 15-820 Pop3 Authentication Failure The machine could not login into the POP3 server. Re-enter the user name and password. 15-830 Pop3 Authentication Required The POP3 server requires authentication to be enabled. Enable authentication. Refer to the System Administration Guide. Final Actions Perform the OF7 Main PWB Check RAP.