Code: 016-338, 016-920, 016-921, 016-922
Description: 016-338 Wireless Option Error 016-920/016-921/016-922 Wireless Setting Error Cause: 016-338:Wireless Driver starting error. 016-920:Timeout Error. 016-921:Download Error. 016-922:Session Overlap Error.
Remedy: 016-338: Turn the power Off and On to check that the error recurs. Then proceed to the FIP. 016-920: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. • A time-out error occurred. Contact the system administrator. • The WPS procedure between the wireless LAN access point (Registrar) timed out. Try connecting again. If the error persists, ensure that the error is replicated after the printer is powered Off and then On, and then proceed to the FIP. 016-921: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. • An error occurred while connecting. Contact the system administrator. • An error occurred while connecting to the wireless LAN access point (Registrar) in WPS mode. Try connecting again. If the error persists, ensure that the error is replicated after the printer is powered Off and then On, and then proceed to the FIP. 016-922: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. • Two or more wireless LAN access points (Registrars) have been found to operate in the WPS-PBC mode. • Set only one wireless access point (Registrar) to operate in the WPS-PBC mode, and execute the process again according to the procedure. If the error persists, ensure that the error is replicated after the printer is powered Off and then On, and then proceed to the FIP.
1 • Check the installation of the WIRELESS ADAPTER • Is the Connector between the WIRELESS ADAPTER and the ESS PWB free of broken/bent pins, foreign substances, burns, and etc., and is the unit installed properly? Go to Step 2. Reinstall the WIRELESS ADAPTER 2 • Replace the WIRELESS ADAPTER. • Does an error occur? Replace (ESS PWB) Troubleshooting complete.
1 • Check the installation of the WIRELESS ADAPTER • Is the Connector between the WIRELESS ADAPTER and the ESS PWB free of broken/bent pins, foreign substances, burns, and etc., and is the unit installed properly? Go to Step 2. Reinstall the WIRELESS ADAPTER 2 • Replace the WIRELESS ADAPTER. • Does an error occur? Replace (ESS PWB) Troubleshooting complete.