Description: ATC Fail Cause: The ATC Sensor error was detected.
Remedy: 1 Is the DRUM CARTRIDGE installed properly, with no foreign substances at the contact point between the ATC Sensor in the DRUM CARTRIDGE and the XEROGRAPHIC CONNECTOR ASSEMBLY? Go to Step 2. Reinstall the DRUM CARTRIDGE 2 Is the connection terminal of the ATC SENSOR part in the DRUM CARTRIDGE damaged? Replace the DRUM CARTRIDGE Go to Step 3. 3 Is the connection terminal of the XEROGRAPHIC CONNECTOR ASSEMBLY damaged? Replace (Xerographic Connector Assembly) Go to Step 4. 4 • Check the connection between the XEROGRAPHIC CONNECTOR ASSEMBLY and the MCU PWB. • Is the XEROGRAPHIC CRUM HARNESS ASSEMBLY(P/J254 - P/J25) connected securely? Go to Step 5. Securely connect the XEROGRAPHIC CRUM HARNESS ASSEMBLY 5 • Replace the DRUM CARTRIDGE. • Does an error occur? Go to Step 6. Troubleshooting complete. 6 • Replace (Xerographic Connector Assembly). • Does an error occur? Go to Step 7. Troubleshooting complete. 7 • Replace the XEROGRAPHIC CRUM HARNESS ASSEMBLY. • Does an error occur? Replace (MCU PWB) Troubleshooting complete.