Code: 05
Description: Scanning error
Causes: • Check the printer cable. • Check how TWAIN driver is installed. • Check harness contact. • Check the IEEE1284 signal level.
Remedy: • Check correct installation, and use standard IEEE1284 cable. • Remove any other scanner driver. • Reboot after reinstallation of the TWAIN driver. • Check CN14 contact in Main PBAl. • If any signal level is defective, install a new Main PBA. - U36-66-74 in Main PBA = 0.8V to 2.4V TTL signal. • If necessary, install a new PBA MAIN MAIN, PL 1-19