Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 01-500 — Xerox WorkCentre 4150

Code: 01-500

Description: Door Open RAP 01-500 The machine has detected that the finisher front door is open. When the front door is open, there is no +24V supply to the motors.
Remedy: 1. Check that the finisher door switch actuator on the finisher front door, PL 12.10 Item 1 is not missing or damaged. 2. Check that the finisher front door closes correctly. Make sure that the front door magnet, PL 12.10 Item 11 is not missing. 3. Enter dC330 code 12-870. Check the finisher door switch (Q12-870), PL 12.10 Item 4. 4. Check the wiring between the finisher front door switch and J2 on the Finisher PWB. If necessary, install a new finisher front door switch, PL 12.10 Item 4. 5. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 6. Refer to Wiring Diagram 8. Check for +24V at pins 14 and 16 on CN27 on the Main PWB. If +24V is not available, perform the following: • Check the wiring between pins 13 and 15 on CON71 on Power Supply Unit 1 and pins 14 and 16 on CN27 on the Main PWB. • Install a new power supply unit 1, PL 1.10 Item 3. • Install a new main PWB, PL 1.10 Item 1. 7. If necessary, install new components: • Finisher front door, PL 12.10 Item 1. • Finisher PWB, PL 12.10 Item 8.

← Xem tất cả mã lỗi Xerox WorkCentre 4150

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie