Description: MCB to DADF Communications Fault RAP 03-920 A main PWB to DADF PWB communications error has been detected
Remedy: NOTE: The main PWB has 4 test points, GND, +3.3V, +5V and +24V. The location of the test points is shown on the Main PWB PJ location illustration. Refer to Wiring Diagram 3, Wiring Diagram 9 and Wiring Diagram 11. Perform the following: 1. Switch off the machine, then switch on the machine. 2. Check the wiring between CN2 on the Main PWB and CN7 on the Scanner PWB. 3. Check the wiring between CN6 on the Scanner PWB and CN2 on the DADF PWB. 4. Install new components as necessary: • Scanner PWB, PL 14.10 Item 15. • DADF PWB, PL 5.20 Item 6. • Main PWB, PL 1.10 Item 1.