Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-100 — Xerox WorkCentre 4150

Code: 07-100

Description: Tray 1 Paper Low RAP 07-100 The machine has detected that tray 1 is nearly empty.
Remedy: 1. Make sure tray 1 is fully home. 2. Pull out tray 1. Check for obstructions behind the tray. 3. Check the tray elevator mechanism on the back of tray 1. 4. Check that the tray 1 paper low sensor actuator on the tray elevator gear, PL 7.10 Item 24 is not missing or damaged. 5. Replace tray 1. Listen for the tray elevating motor to raise the knock-up plate. If the plate does not rise, check the wiring between the tray 1 elevating motor and CN19 on the Main PWB. If necessary, install new components: • Tray 1 elevating motor, PL 7.15 Item 8. • Tray feed assembly, PL 8.10 Item 1. 6. Enter dC330 code 07-160. Check the tray 1 paper low sensor (Q07-160), PL 7.15 Item 2. 7. Check the wiring between the tray 1 paper low sensor and CN15 on the Main PWB. If necessary, install a new tray 1 paper low sensor, PL 7.15 Item 2. 8. If necessary, install new components: • Main PWB, PL 1.10 Item 1. • Tray 1 cassette assembly, PL 7.10 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 4150

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie