Description: Detection error of lower roll spool (support number : 100F)
Causes: LOWER RIGHT SPOOL SET SENSOR or LOWER LEFT SPOOL SET SENSOR detects “No spool” when spool lock solenoid is ON.
Remedy: 1 Check the items below. a) Engagement of the spool with the gear of the printer side. b) Check if the paper in use has strong stiffness, is a heavy roll paper, or is easy to get curled. c) Damage of the spool sensor lever. d) Perform [DIAGNOSIS > I/O DISPLAY] to check the operation of LOWER RIGHT SPOOL SET SENSOR and LOWER LEFT SPOOL SET SENSOR. Appropriate Replace SPOOL LOCK UNIT. Inappropriate a) Reset the spool. b) Change the paper to use. c) Replace COVER, ROLL GEAR L and/or SPOOL SENSOR UNIT. d) Replace LOWER RIGHT SPOOL SET SENSOR and/or LOWER LEFT SPOOL SET SENSOR when the connect condition of the harness is not troubled.