Code: 12-500
Description: Full Stack RAP 12-500 The machine has detected that the finisher output tray is full.
Remedy: 1. Remove all documents from the finisher output tray. 2. Check that the stacker top sensor actuator, PL 12.45 Item 9 moves freely and is not damaged. 3. Enter dC330 code 12-840. Check the stacker top sensor (Q12-840), PL 12.45 Item 8. 4. Check the wiring between the stacker top sensor and J7 on the Finisher PWB. If necessary, install a new stacker top sensor, PL 12.45 Item 8. 5. Refer to Wiring Diagram 8. Check for +24V at pins 14 and 16 on CN27 on the Main PWB. If +24V is not available, perform the following: • Check the wiring between pins 13 and 15 on CON71 on Power Supply Unit 1 and pins 14 and 16 on CN27 on the Main PWB. • Install a new power supply unit 1, PL 1.10 Item 3. • Install a new main PWB, PL 1.10 Item 1. 6. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 7. If necessary, install a new finisher PWB, PL 12.10 Item 8.