Code: 12-730
Description: Support Finger Fault RAP 12-730 The machine has detected a fault with the support fingers.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Remove all documents from the finisher. 3. Check for damage or obstructions that would prevent the support fingers, PL 12.25 Item 9 from extending. 4. Check that the support finger home sensor actuator on the front support finger is not missing or damaged. 5. Enter dC330 code 12-825. Check the support finger home sensor (Q12-825), PL 12.40 Item 2. 6. Check the wiring between the support finger home sensor and J8 on the Finisher PWB. If necessary, install a new support finger home sensor, PL 12.40 Item 2. 7. Enter dC330 codes 12-410 and 12-400. Check that the support finger motor (MOT12- 400), PL 12.25 Item 2 runs and drives the support fingers. 8. Check the wiring between the support finger motor and J6 on the Finisher PWB. 9. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 10. If necessary, install new components: • Support finger motor, PL 12.25 Item 2. • Front support finger assembly, PL 12.25 Item 21. • Rear support finger assembly, PL 12.25 Item 22. • Finisher PWB, PL 12.10 Item 8.