Code: 12-760
Description: Stacker Fault RAP 12-760 The machine has detected a fault with the stacker
Remedy: 1. Remove all documents from the finisher. 2. Check for damage or obstructions that would prevent the stacker tray, PL 12.45 Item 1 from moving. 3. Enter dC330 code 12-845. Check the stacker bottom switch (S12-845), PL 12.45 Item 7. 4. Check the wiring between the stacker bottom switch and J14 on the Finisher PWB. If necessary, install a new stacker bottom switch, PL 12.45 Item 7. 5. Enter dC330 codes 12-600 and 12-610. Check that the stacker tray motor (MOT12-600), PL 12.45 Item 20 runs and drives the stacker tray down, then up. 6. Check the wiring between the stacker tray motor and J14 on the Finisher PWB. 7. If paper is overflowing the tray when it is at the lower limit, check the stack height sensor. Go the 12-500 Full Stack RAP. 8. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 9. If necessary, install new components: • Stacker tray motor, PL 12.45 Item 20. • Finisher PWB, PL 12.10 Item 8.