Code: 03-410, 03-420, 03-430, 03-440, 03-450
Description: Paper Information Mismatch RAP 03-410 During a print job, the machine has detected a tray 1 paper colour, type or size mismatch. 03-420 During a print job, the machine has detected a tray 2 paper colour, type or size mismatch. 03-430 During a print job, the machine has detected a tray 3 paper colour, type or size mismatch. 03-440 During a print job, the machine has detected a tray 4 paper colour, type or size mismatch. 03-450 During a print job, the machine has detected a bypass tray paper colour, type or size mismatch.
Remedy: NOTE: The main PWB has 4 test points, GND, +3.3V, +5V and +24V. The location of the test points is shown on the Main PWB PJ location illustration. Perform the following: 1. If the fault is present when printing, check that the print driver and machine tray information are correct. 2. Go to GP 4 System Administration Tools. Check that the relevant tray paper type, colour and size settings are correct. 3. 03-410 Only. Refer to Wiring Diagram 6. Perform the following: a. Check the wiring between the paper size detect PWB, PL 7.15 Item 5 and CN15 on the Main PWB. b. Install new components as necessary: • Paper size detect PWB, PL 7.15 Item 5. • Paper size detect assembly, PL 7.15 Item 1. • Main PWB, PL 1.10 Item 1. 4. 03-420, 03-430 or 03-440 Only. Refer to Wiring Diagram 7 and Wiring Diagram 13. Perform the following: a. Check the wiring between the paper size detect PWB, PL 7.20 Item 5 and CN5 on the Tray PWB. b. Check the wiring between CN1 on the relevant Tray PWB and CN24 on the Main PWB. c. Install new components as necessary: • Paper size detect PWB, PL 7.20 Item 5. • Paper size detect assembly, PL 7.20 Item 25. • Tray connector, PL 7.20 Item 17. • Main PWB, PL 1.10 Item 1.