Description: MCB to NIC Communications Fault RAP 03-910 A main PWB to NIC PWB communications error has been detected.
Remedy: NOTE: The NIC PWB has two LEDs positioned below the network connection. The upper LED on indicates that the NIC PWB is ready. The lower LED flashing indicates that the network is good. 1. Switch off the machine, then switch on the machine. 2. Make sure that the network cable is connected to the machine. 3. Make sure that the NIC PWB, PL 1.10 Item 13 is securely installed on to the main PWB. 4. Go to GP 4 System Administration Tools. Check with the customer that the connectivity and network setup settings are correct. 5. Install new components as necessary: • NIC PWB, PL 1.10 Item 13. • Main PWB, PL 1.10 Item 1.