Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05-100 — Xerox WorkCentre 4250

Code: 05-100

Description: DADF Jam 1 RAP 05-100 The lead edge or trail edge of the document failed to actuate or deactuate the scan sensor within the correct time.
Remedy: 1. Open the DADF top cover assembly, PL 5.15 Item 11. Remove all jammed paper. 2. Check the document path for damage or obstructions. 3. Check that the following components are clean and rotate freely. • Registration roll, PL 5.15 Item 21. • Registration roll idlers, PL 5.15 Item 28. 4. Remove the DADF left guide, PL 5.20 Item 9. 5. Check that the scan sensor actuator, PL 5.25 Item 28 moves freely and is not damaged. 6. Enter dC330 code 05-140. Check the scan sensor (Q05-140). NOTE: The scan sensor is mounted on the DADF PWB, PL 5.20 Item 6. 7. Remove the DADF rear cover, PL 5.10 Item 4. Enter dC330 code 05-200. Check that the DADF scan motor, PL 5.25 Item 12 runs and drives the scan roll, PL 5.25 Item 23. 8. Close the DADF top cover assembly. While the DADF scan motor runs, stack the code 05-310 to energize the registration clutch (CL05-310). Check that the registration roll, PL 5.15 Item 21 rotates. 9. Check the wiring between the DADF scan motor and CN4 on the DADF PWB. 10. Check the wiring between the registration clutch, PL 5.25 Item 19 and CN6 on the DADF PWB. If necessary, install a new registration clutch, PL 5.25 Item 19. 11. If necessary, install new components: • DADF PWB, PL 5.20 Item 6. • DADF scan motor, PL 5.25 Item 12. • DADF scan motor assembly, PL 5.25 Item 10. • Document transport assembly, PL 5.10 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 4250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie