Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05-500 — Xerox WorkCentre 4250

Code: 05-500

Description: DADF Jam 5 RAP 05-500 The machine has detected that the DADF, DADF top cover assembly or exit assembly are open during run.
Remedy: 1. Open the DADF top cover assembly, PL 5.15 Item 11. Remove all jammed paper. 2. Raise the DADF input tray, PL 5.10 Item 5. Remove all jammed paper. 3. Open the DADF. Check that the platen cover sensor actuator, PL 14.10 Item 12 moves freely and is not damaged. 4. Enter dC330 code 05-400. Check the platen cover sensor (Q05-400), PL 14.10 Item 14. 5. Check the wiring between the platen cover sensor and CN3 on the Scanner PWB. If necessary, install a new platen cover sensor, PL 14.10 Item 14. 6. Open the DADF top cover assembly, PL 5.15 Item 11. Check that the door open switch actuator is not damaged. 7. Enter dC330 code 05-160. Check the DADF door open switch (S05-160), PL 5.25 Item 8. 8. Check the wiring between the DADF door open switch and CN6 on the DADF PWB. If necessary, install a new DADF door open switch, PL 5.25 Item 8. 9. Open the exit assembly, PL 5.20 Item 26. Check that the exit open sensor actuator is not damaged. 10. Enter dC330 code 05-180. Check the exit open sensor (Q05-180), PL 5.20 Item 16. 11. Check the wiring between the exit open sensor and CN6 on the DADF Sensor PWB. If necessary, install a new exit open sensor, PL 5.20 Item 16. 12. Check the wiring between CN1 on the DADF Sensor PWB and CN3 on the DADF PWB. 13. If necessary, install new components: • DADF PWB, PL 5.20 Item 6. • DADF sensor PWB, PL 5.20 Item 4. • Document transport assembly, PL 5.10 Item 2. • Scanner assembly, PL 14.10 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 4250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie