Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-200, 07-300, 07-400 — Xerox WorkCentre 4250

Code: 07-200, 07-300, 07-400

Description: Tray 2, 3 or 4 Paper Low RAP 07-200 The machine has detected that tray 2 is nearly empty when the tray is full. 07-300 The machine has detected that tray 3 is nearly empty when the tray is full. 07-400 The machine has detected that tray 4 is nearly empty when the tray is full.
Remedy: 1. Make sure the tray is fully home. 2. Pull out the tray. Check for obstructions behind the tray. 3. Check the tray elevator mechanism on the back of the tray. 4. Check that the paper low sensor actuator on the tray elevator gear, PL 7.10 Item 24 is not missing or damaged. 5. Replace the tray. Listen for the tray elevating motor to raise the knock-up plate. If the plate does not rise, check the wiring between the tray elevating motor and CN7 on the Tray PWB. If necessary, install new components: • Tray elevating motor, PL 7.20 Item 7. • Tray feed assembly, PL 8.10 Item 1. 6. Enter dC330. Check the relevant paper low sensor, PL 7.20 Item 3: • Tray 2. Code 07-260. • Tray 3. Code 07-360. • Tray 4. Code 07-460. 7. Check the wiring between the paper low sensor and CN5 on the Tray PWB. If necessary, install a new paper low sensor, PL 7.20 Item 3. 8. Check the wiring between CN1 on the Tray PWB and CN24 on the Main PWB. 9. If necessary, install new components: • Tray PWB, PL 7.20 Item 6. • Main PWB, PL 1.10 Item 1. • Tray cassette, PL 7.10 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 4250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie