Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-200, 08-300, 08-400 — Xerox WorkCentre 4250

Code: 08-200, 08-300, 08-400

Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
Remedy: 1. Pull out the tray. Remove all jammed paper. 2. Open the tray access door, PL 7.20 Item 18. Remove all jammed paper. 3. Check the paper path for damage or obstructions. 4. Check that the registration sensor actuator, PL 8.15 Item 4 moves freely and is not damaged. If necessary, install a new registration sensor actuator assembly, PL 8.15 Item 13. 5. Enter dC330 code 08-500. Check the registration sensor (Q08-500), PL 8.15 Item 8. 6. Check the wiring between the registration sensor and CN13 on the Main PWB. If necessary, install a new registration sensor, PL 8.15 Item 8. 7. Check that the tray feed sensor actuator, PL 7.25 Item 16 moves freely and is not damaged. 8. Enter dC330. Check the relevant tray feed sensor, PL 7.25 Item 14: • Tray 2. Code 08-200. • Tray 3. Code 08-300. • Tray 4. Code 08-400. 9. Check the wiring between the tray feed sensor and CN10 on the Tray PWB. If necessary, install a new feed sensor, PL 7.25 Item 14. 10. Enter dC330 code. Check that the relevant tray feed motor, PL 7.20 Item 9, runs and drives the tray transport roll, PL 7.25 Item 22: • Tray 2. Code 08-920. • Tray 3. Code 08-930. • Tray 4. Code 08-940. 11. Check the wiring between the tray feed motor and CN4 on the Tray PWB. 12. While the tray feed motor runs, stack the relevant code to energize the tray pickup clutch. Check that the tray feed roll, PL 7.25 Item 11 rotates: • Tray 2. Code 08-820. • Tray 3. Code 08-830. • Tray 4. Code 08-840. 13. Check the wiring between the tray pickup clutch and CN4 on the Tray PWB. 14. Check that the following components are clean and rotate freely: • Tray feed roll, PL 7.25 Item 11. • Tray nudger roll, PL 8.10 Item 12. • Tray retard roll, PL 8.10 Item 12. • Tray transport roll, PL 7.25 Item 22. • Tray transport roll idlers, part of the tray access door, PL 7.20 Item 18. 15. If necessary, install new components: • Tray feed roll, PL 7.25 Item 11. • Tray nudger roll, PL 8.10 Item 12. • Tray feed motor, PL 7.20 Item 9. • Tray PWB, PL 7.20 Item 6. • Tray assembly, PL 7.20 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 4250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie