Code: 09-200
Description: Toner Empty RAP 09-200 The machine has detected that the toner module is empty.
Remedy: 1. Make sure that the toner module is not empty. If necessary, install a new toner module, PL 9.10 Item 2. 2. Enter dC330 code 09-600 and 09-700. Check that the toner dispense motor (MOT09- 600), PL 4.20 Item 3 runs and deactuates the toner sensor (Q09-700). NOTE: It may be necessary to enter the codes several times to ensure that the toner dispense motor deactuates the toner sensor. It may also be necessary to make several copies to prevent over toning the xerographic module. 3. Remove the toner module, PL 9.10 Item 2 and xerographic module, PL 9.10 Item 1. Enter dC330 code 09-600. Make sure that the toner dispense motor runs and drives the toner dispense idler gear, PL 4.20 Item 7 and coupling, PL 4.20 Item 9. Install new components as necessary, PL 4.20. 4. Check the wiring between the toner dispense motor and CN9 on the Main PWB. 5. Check the wiring between the xerographic module connector, PL 4.15 Item 17 and CN11 on the Main PWB. If necessary, install a new xerographic module connector, PL 4.15 Item 17. 6. Install new components as necessary: • Xerographic module, PL 9.10 Item 1. • Main PWB, PL 1.10 Item 1.