Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-400 — Xerox WorkCentre 4250

Code: 12-400

Description: Finisher Duplex Jam RAP 12-400 The machine has detected a jam in the duplex path above the finisher.
Remedy: 1. Open the finisher front door, PL 12.10 Item 1. Lower the document entry guide, PL 12.15 Item 23 and the duplex guide, PL 12.15 Item 24. Remove all jammed documents. Open the right cover assembly, PL 7.30 Item 1, remove all jammed paper. 2. Remove the finisher, REP 12.1. Make 10 duplex copies. If the machine jams, go to the 08-610 Duplex Jam 1 RAP. 3. If the duplex copies are good, perform the following: a. Check that the finisher duplex paper sensor actuator, PL 12.15 Item 17 moves freely and is not damaged. b. Enter dC330 code 12-880. Check the finisher duplex paper sensor (Q12-880), PL 12.15 Item 15. c. Check the wiring between the finisher duplex paper sensor and J7 on the Finisher PWB. If necessary, install a new duplex paper sensor, PL 12.15 Item 15. d. Check the duplex guide, PL 12.15 Item 24 for damage. e. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. f. If necessary, install a new finisher PWB, PL 12.10 Item 8.

← Xem tất cả mã lỗi Xerox WorkCentre 4250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie