Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-710 — Xerox WorkCentre 4250

Code: 12-710

Description: Front Jogger Fault RAP 12-710 The machine has detected a fault with the front jogger.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Remove all documents from the finisher. 3. Check for damage or obstructions that would prevent the front jogger, PL 12.30 Item 27 from operating correctly. 4. Enter dC330 code 12-815. Check the front jogger home sensor (Q12-815), PL 12.30 Item 10. 5. Check the wiring between the front jogger home sensor and J8 on the Finisher PWB. If necessary install a new front jogger home sensor, PL 12.30 Item 10. 6. Enter dC330 codes 12-310 and 12-300. Check that the front jogger motor (MOT12-300) runs and drives the front jogger arm, PL 12.30 Item 24 between the home and the inboard positions. 7. Check the wiring between the front jogger motor and J6 on the Finisher PWB. 8. Check the front jogger belt, PL 12.30 Item 23. If necessary, install a new front jogger belt. 9. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 10. If necessary, install new components as necessary: • Front jogger assembly, PL 12.30 Item 27. • Finisher PWB, PL 12.10 Item 8.

← Xem tất cả mã lỗi Xerox WorkCentre 4250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie