Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 03-100 — Xerox WorkCentre 4260

Code: 03-100

Description: Interface Error RAP 03-100 The machine to finisher communications have failed.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Check the finisher interface harness between J1 and J3 on the Finisher PWB and CN32 on the Main PWB. 3. Remove the finisher, REP 12.1. Check that the IOT set sensor actuator on the rear exit cover, PL 1.10 Item 20 is not missing or damaged. 4. Enter dC330 code 12-875. Check the IOT set sensor (Q12-875), PL 12.10 Item 13. NOTE: To check the IOT set sensor, unlatch then slide the finisher 5cm (2 inches) away from the machine. Then latch the finisher back to the machine, refer to REP 12.1. 5. Check the wiring between the IOT set sensor and J7 on the Finisher PWB. If necessary, install a new IOT set sensor, PL 12.10 Item 13. 6. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 7. If necessary, install new components: • Finisher interface harness, PL 12.10 Item 18. • Finisher PWB, PL 12.10 Item 8. • Main PWB, PL 1.10 Item 1. • Rear exit cover, PL 1.10 Item 20.

← Xem tất cả mã lỗi Xerox WorkCentre 4260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie