Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 04-100 — Xerox WorkCentre 4260

Code: 04-100

Description: Tray 1 Elevating Error RAP 04-100 The tray 1 stack height sensor did not actuate within 13 seconds of the tray 1 elevating motor start.
Remedy: 1. Make sure tray 1 is fully home. 2. Pull out tray 1. Check for obstructions behind the tray. 3. Check the tray elevator mechanism on the back of tray 1. 4. Check that the tray 1 stack height sensor actuator on the feed head, PL 8.10 Item 5 is not missing or damaged. If necessary, install a new tray 1 feed assembly, PL 8.10 Item 1. 5. Enter dC330 code 07-150. Check the tray 1 stack height sensor (Q07-150), PL 8.10 Item 2. 6. Check the wiring between the tray 1 stack height sensor and CN19 on the Main PWB. If necessary, install a new tray 1 stack height sensor, PL 8.10 Item 2. 7. Check the tray 1 up limit switch, PL 8.10 Item 17. NOTE: There is not a component control code to check the up limit switch. 8. Enter dC330 code 04-510. Check the tray 1 elevating motor (MOT04-510), PL 7.15 Item 8. 9. Check the wiring between the tray 1 up limit switch and the tray 1 elevating motor, PL 7.15 Item 8 and CN19 on the Main PWB. 10. If necessary, install new components: • Tray 1 elevating motor, PL 7.15 Item 8. • Main PWB, PL 1.10 Item 1. • Tray 1 cassette assembly, PL 7.10 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 4260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie