Description: Main Motor Locked RAP 04-500 The machine has detected that the main BLDC motor is not being controlled.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Remove the toner module, PL 9.10 Item 2, then the xerographic module, PL 9.10 Item 1. Enter dC330 code 04-100. Check that the main BLDC motor (MOT04-100), PL 4.20 Item 2 runs. 3. Check the wiring between the main BLDC motor and CN9 on the Main PWB. 4. If necessary, install new components: • Main BLDC motor, PL 4.20 Item 2. • Main PWB, PL 1.10 Item 1.