Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05-200 — Xerox WorkCentre 4260

Code: 05-200

Description: DADF Jam 2 RAP 05-200 The lead edge or trail edge of the document failed to actuate or deactuate the gate sensor within the correct time.
Remedy: 1. Open the DADF top cover assembly, PL 5.15 Item 11. Remove all jammed paper. 2. Raise the DADF input tray, PL 5.10 Item 5. Remove all jammed paper. 3. Check that the exit assembly, PL 5.20 Item 26 is closed. 4. Check the document path for damage or obstructions. 5. Check that the following components are clean and rotate freely. • Gate roll, PL 5.25 Item 15. • Gate roll idlers, PL 5.10 Item 18. • Exit roll, PL 5.20 Item 2. • Exit roll idlers, PL 5.20 Item 20. 6. Check that the gate sensor actuator, PL 5.10 Item 26 moves freely and is not damaged. 7. Enter dC330 code 05-150. Check the gate sensor (Q05-150), PL 5.10 Item 24. if necessary, install a new gate sensor, PL 5.10 Item 24. 8. Remove the DADF rear cover, PL 5.10 Item 4. Enter dC330 code 05-200. Check that the DADF scan motor runs, PL 5.25 Item 12 and drives the gate roll, PL 5.25 Item 15. 9. Enter code 05-210. Check that the DADF duplex motor, PL 5.25 Item 5 runs and drives the exit roll, PL 5.20 Item 2. 10. Check the wiring between the DADF scan motor and CN4 on the DADF PWB. 11. Check the wiring between the duplex motor and CN5 on the DADF PWB. 12. If necessary, install new components: • DADF PWB, PL 5.20 Item 6. • DADF scan motor, PL 5.25 Item 12. • DADF scan motor assembly, PL 5.25 Item 10. • Duplex motor assembly, PL 5.25 Item 4. • Document transport assembly, PL 5.10 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 4260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie