Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05-300 — Xerox WorkCentre 4260

Code: 05-300

Description: DADF Jam 3 RAP 05-300 The lead edge of the document failed to actuate the duplex sensor within the correct time in reverse mode.
Remedy: 1. Raise the DADF input tray, PL 5.10 Item 5. Remove all jammed paper. 2. Check the document path for damage or obstructions. 3. Check the duplex gate, PL 5.25 Item 25 for damage. If necessary, install a new duplex gate. 4. Check that the following components are clean and rotate freely. • Exit roll, PL 5.20 Item 2. • Exit roll idlers, PL 5.20 Item 20. 5. Check that the duplex sensor actuator, PL 5.25 Item 27 moves freely and is not damaged. 6. Enter dC330 code 05-170. Check the duplex sensor (Q05-170). NOTE: The duplex sensor is mounted on the DADF PWB, PL 5.20 Item 6. 7. Enter code 05-220. Check that the DADF duplex motor, PL 5.25 Item 5 runs in the reverse direction and drives the exit roll, PL 5.20 Item 2. 8. Check the wiring between the DADF duplex motor and CN5 on the DADF PWB. 9. Check the exit roll gear, PL 5.20 Item 5 for damage. If necessary, install a new exit roll gear. 10. If necessary, install new components: • DADF PWB, PL 5.20 Item 6. • Duplex motor assembly, PL 5.25 Item 4. • Document transport assembly, PL 5.10 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 4260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie