Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-620 — Xerox WorkCentre 4260

Code: 08-620

Description: Duplex Jam 2 RAP 08-620 The lead edge of the document failed to actuate the duplex jam 2 sensor within the correct time.
Remedy: 1. Open the right hand cover. Remove all jammed paper. 2. Check that the paper path is clear and not damaged. 3. Check that the duplex jam 2 sensor actuator, PL 8.15 Item 10 moves freely and is not damaged. 4. Enter dC330 code 08-710. Check the duplex jam 2 sensor (Q08-710), PL 8.15 Item 8. 5. Check the wiring between the duplex jam 2 sensor and CN13 on the Main PWB. If necessary, install a new duplex jam 2 sensor, PL 8.15 Item 8. 6. Enter dC330 code 04-100 to run the main BLDC motor. 7. Enter dC330 code 08-860 to energize the duplex feed clutch (CL08-860), PL 7.30 Item 4. Manually rotate the drive gear on the duplex feed clutch. Check that the duplex feed rolls, PL 7.30 Item 10 and PL 7.30 Item 12 are clean and rotate freely. Install new components as necessary. 8. Check the wiring between the duplex feed clutch and CN25 on the Main PWB. Install new components as necessary, PL 7.30. 9. Check that the duplex feed roll idlers, PL 7.35 Item 6 are clean and rotate freely. Install new components as necessary, PL 7.35. 10. If necessary, install new components: • Right cover assembly, PL 7.30 Item 1. • Main PWB, PL 1.10 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 4260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie