Code: 10-300
Description: Over Heat Error RAP 10-300 The fuser temperature has risen above the normal level. Although the fuser unit can return to a normal operating temperature, the fuser may consequently be damaged.
Remedy: 1. Enter codes 10-200 and 10-210. Perform a fuser temperature check to verify the condition of the thermistors. 2. Switch off the machine. Remove the fuser assembly. Examine the fuser assembly for heat damage. Install new components as necessary, PL 10.25 and PL 10.26. 3. Check that the thermistors, PL 10.25 Item 9 are in good contact with the fuser heat roller and are clean. Check the wiring to the thermistors. Install new components as necessary, PL 10.25. 4. Check that there is continuity through the fuser heater and across the over temperature cut-out. If necessary, install a new thermostat assembly, PL 10.25 Item 2. 5. Check the wiring between the fuser connector, PL 4.15 Item 20 and CON3, CON8 and CON9 on Power Supply Unit 2. If necessary, install a new fuser connector. 6. Check the wiring between CON4 on Power Supply Unit 2 and CN7 on the Main PWB. 7. Check that the fuser fan is working. Go to the OF3 Air Systems RAP. 8. Install new components as necessary: • Power supply unit 2, PL 1.10 Item 4. • Main PWB, PL 1.10 Item 1. • HVPS, PL 1.10 Item 2.