Description: Paddle Fault RAP 12-700 The machine has detected a fault with the compiler paddle.
Remedy: 1. Remove all documents from the finisher. 2. Enter dC330 code 12-810. Check the paddle home sensor (Q12-810), PL 12.30 Item 10. 3. Check the wiring between the paddle home sensor and J8 on the Finisher PWB. If necessary, install a new paddle home sensor, PL 12.30 Item 10. 4. Enter dC330 code 12-200. Check that the paddle motor (MOT12-200), PL 12.30 Item 4 runs and drives the compiler exit paddles, PL 12.30 Item 1. 5. Check the wiring between the paddle motor and J5 on the Finisher PWB. 6. Check that the finisher PWB DIP switch settings are correct. Refer to the 12A Finisher PWB DIP Switch Settings RAP. 7. If necessary, install new components: • Paddle motor, PL 12.30 Item 4. • Finisher PWB, PL 12.10 Item 8.