Description: DADF Simplex/Side 1 Pre Regi Sensor On Jam • After Pre-Feed started for the first sheet (DADF Feed Motor On (CW)) in Simplex and Duplex, the DADF Pre Regi Sensor did not turn ON within the specified time. • After Pre-Feed started for the second sheet onwards (DADF Feed Motor On (CW)) in Duplex, the DADF Pre Regi Sensor did not turn ON within the specified time.
Remedy: Check the following: • Transportation failure due to foreign substance on the document path. • The surface of the Feed Roll and Nudger Roll for foreign substances. • The surface of the Feed Roll and Nudger Roll for wear. • The DADF Pre Regi Sensor (Input Check [005-206]) for operation failure. (PL 56.14) • The DADF Feed Clutch (Output Check [005-062]) for operation failure. (PL 56.7) • The DADF Feed Motor (Output Check [005-008]) for operation failure. (PL 56.6) • The Drive Gear for wear and damage. If no problem is found, replace the DADF PWB. (PL 56.2)