Description: DADF Invert Sensor On Jam on Inverting/ DADF Invert Sensor On Jam [DADF Invert Sensor On Jam on Inverting] After the DADF Regi Sensor turned ON at Invert operation, the DADF Invert Sensor did not turn ON within the specified time. [DADF Invert Sensor On Jam] After the DADF Regi Sensor turned ON in the Scan operation, the DADF Invert Sensor did not turn ON within the specified time.
Remedy: Check the following: • Transportation failure due to foreign substance on the document path. • The surface of the Out Roll for foreign substances. • The surface of the Out Roll for wear. • The DADF Invert Sensor (Input Check [005-211]) for operation failure. (PL 56.10) • The DADF Regi Sensor (Input Check [005-110]) for operation failure. (PL 56.14) • The DADF Feed Motor (Output Check [005-008]) for operation failure. (PL 56.6) • The Drive Gear for wear and damage. If no problem is found, replace the DADF PWB. (PL 56.2)