Description: Print head contact error at starting up (support number : 4801)
Causes: Direct diode sensor detects print head contact failure at print head replacement.
Remedy: 1 Perform [DIAGNOSIS > CR_SYSTEM_CHECK] to diagnose carriage system. No problem Go to 2. Abnormal • Problem in ACC. SENSOR CHECK or CR VIBRATIONCHECK Replace CARRIAGE UNIT. • Problem in LONG FFC CHECK or CRC value changes after turning the printer off and back on Replace FLEXIBLE CABLE UNIT. 2 Remove the print head, and check the items below. a) Condition of the print head nozzle side surface. b) Condition of the print head contacting part. Proper condition Go to 3 Abnormal condition a) Replace the print head. b) Clean the surface of the print head contacting part. (The waste cloth without a nap must be used.) 3 Replace MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary.) adjustments.)