Description: Fusing Unit Hot Not Ready Return Time Fail The time taken to recover from High Temperature Not Ready state has exceeded the specified time.
Remedy: 1. Turn the power OFF and ON. 2. Turn OFF the power and check the following: • The Fusing Unit for improper installation. • The connection between the Fusing Unit P10 and the LVPS J511 for open circuit, short circuit, and poor contact. • The connection between the Fusing Unit P600 and the ESS/MCU PWB J403 for open circuit, short circuit, and poor contact. • The connection between the ESS/MCU PWB J401 and the LVPS J513 for open circuit, short circuit, and poor contact. • The Heat Roll for wound up, stuck paper. 3. If the problem persists, replace the following parts in sequence: • Fusing Unit (PL 7.1) • LVPS (PL 18.1) • ESS/MCU PWB (PL 18.1)