Description: Fusing Unit Exit Sensor Off Jam (Short) The time taken for the Fusing Unit Exit Sensor to turn from ON to OFF is shorter than the specified time.
Remedy: Check the following: • The Fusing Unit Exit Sensor (Input Check [071-106]) for operation failure. (PL 7.1) • The Regi Sensor (Input Check [071-105]) for operation failure. (PL 15.1) • The Main Drive Motor (Output Check [042-001]) for operation failure. (PL 3.1) • The Invert Motor (Output Check [071-003] (Exit)) for operation failure. (When Duplex is installed) (PL 17.1) • The Heat Roll for wound up, stuck paper. • Usage of out of spec paper. If no problems are found, replace the ESS/MCU PWB. (PL 18.1)