Description: Controller Backup NVM Data Defect Any of the following was detected: • The Backup NVM data of the Controller is corrupted. • The Backup NVM of the Controller is not installed. • Any one of the Print Counter has reached its maximum value. • The number of times the NVM can be changed has reached its limit.
Remedy: 1. Turn the power OFF and ON. 2. Check the EEPROM (Master) on the ESS/MCU PWB for poor contact with the socket. 3. Perform NVM Initialize in the CE Mode. (Refer to [6.4.2.5 NVM Initialize].) 4. If the problem persists, replace the ESS/MCU PWB. (PL 18.1)