Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1-1 — Xerox WorkCentre 5020

Code: C1-1

Description: Tray1 F/O#1 SNR on JAM. Timeout between Tray1 Feed Clutch ON and Tray1 Feed Sensor ON.
Remedy: I/O Diagnostic Codes • [08-07] Tray1 Feed Sensor • [08-12] Tray1 Feed Clutch
• Feed Roll or Retard Pad dirty, contaminated with paper dust, worn, or faulty • Tray1 Feed Sensor dirty and Sensor Actuator deformed or damaged • Paper damaged, not within specification, or not loaded correctly • Foreign matter, burrs, or paper in the paper path • Drive gear worn or damaged • Tray1 Feed Clutch faulty • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Tray 1 Feed Sensor (PL 2.5) . – Wire between Tray 1 Feed Sensor J158-3 ( P/J158) and LVPS J501-6 ( P/J501) – Wire between Tray 1 Feed Sensor J158-2 and LVPS J501-7 – Wire between Tray 1 Feed Sensor J158-1 and LVPS J501-8 • Replace the Tray1 Feed Clutch (PL 2.2) and the AIOC PWB (PL 8.1) in that order.

← Xem tất cả mã lỗi Xerox WorkCentre 5020

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie