Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1-2 — Xerox WorkCentre 5020

Code: C1-2

Description: Tray1 Regi SNR on JAM. Timeout between Tray1 Feed Sensor ON and IOT Registration Sensor ON.
Remedy: I/O Diagnostic Codes • [08-07] Tray1 Feed Sensor • [08-05] IOT Registration Sensor • [08-10] IOT Registration Clutch
Check Items: • Take Away Roll 1 dirty, contaminated with paper dust, worn, or faulty • Tray1 Feed Sensor dirty and Sensor Actuator deformed or damaged • Paper damaged, not within specification, or not loaded correctly • Foreign matter, burrs, or paper in the paper path • Drive gear worn or damaged • IOT Registration Clutch faulty • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Tray 1 Feed Sensor (PL 2.5) . – Wire between Tray 1 Feed Sensor J158-3 ( P/J158) and LVPS J501-6 ( P/J501) – Wire between Tray 1 Feed Sensor J158-2 and LVPS J501-7 – Wire between Tray 1 Feed Sensor J158-1 and LVPS J501-8 • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the IOT Registration Sensor (PL 2.9). - Wire between IOT Registration Sensor J156-3 ( P/J156) and LVPS J503-1 ( P/J503) - Wire between IOT Registration Sensor J156-2 and LVPS J503-2 - Wire between IOT Registration Sensor J156-1 and LVPS J503-3 • Replace the IOT Registration Clutch (PL 2.9) and the AIOC PWB (PL 8.1) in that order.

← Xem tất cả mã lỗi Xerox WorkCentre 5020

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie