Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2-1 — Xerox WorkCentre 5020

Code: C2-1

Description: STM F/O#2 SNR on JAM. Timeout between STM Feed Motor ON and STM Feed Sensor ON.
Remedy: I/O Diagnostic Codes • [08-06] STM Feed Sensor • [08-11] STM Feed Clutch • [08-13] STM Feed Motor
Check Items: • Tray2 Feed Roll or Tray2 Retard Roll dirty, contaminated with paper dust, worn, or faulty • STM Feed Sensor dirty and Sensor Actuator deformed or damaged • Paper damaged, not within specification, or not loaded correctly • Foreign matter, burrs, or paper in the paper path • Drive gear worn or damaged • STM Feed Clutch faulty • STM Feed Motor faulty • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the STM Feed Sensor (PL 11.5) . – - Wire between STM Feed Sensor J172-3 ( P/J172) and STM PWB J542-6 ( P/J542) – - Wire between STM Feed Sensor J172-2 and STM PWB J542-7 – - Wire between STM Feed Sensor J172-1 and STM PWB J542-8 • Replace the STM Feed Clutch (PL 11.6) , the STM Feed Motor (PL 11.6) , and the STM PWB (PL 11.5) in that order.

← Xem tất cả mã lỗi Xerox WorkCentre 5020

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie