Code: C5-0
Description: No paper in the selected paper tray (Tray1). • No paper is detected in Tray1 when ATS function is disabled and Tray1 is selected during a copy job. • No paper is detected in Tray1 when Tray1 is selected during a print job (the paper size setting matches the one specified for the job).
Remedy: I/O Diagnostic Codes [07-07] Tray1 No Paper Sensor
Check Items: • Press the [Stop] button on the Control Panel. • Check the tray to see if it is empty; if it is, add paper specified by the job. • Tray1 No Paper Sensor dirty and Sensor Actuator deformed or damaged • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Tray 1 No Paper Sensor (PL 2.7) . – Wire between Tray1 No Paper Sensor J157-3 ( P/J157) and LVPS J501-3 ( P/J501) – Wire between Tray1 No Paper Sensor J157-2 and LVPS J501-4 – Wire between Tray1 No Paper Sensor J157-1 and LVPS J501-5 • Replace the AIOC PWB (PL 8.1) .
Check Items: • Press the [Stop] button on the Control Panel. • Check the tray to see if it is empty; if it is, add paper specified by the job. • Tray1 No Paper Sensor dirty and Sensor Actuator deformed or damaged • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Tray 1 No Paper Sensor (PL 2.7) . – Wire between Tray1 No Paper Sensor J157-3 ( P/J157) and LVPS J501-3 ( P/J501) – Wire between Tray1 No Paper Sensor J157-2 and LVPS J501-4 – Wire between Tray1 No Paper Sensor J157-1 and LVPS J501-5 • Replace the AIOC PWB (PL 8.1) .