Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U4-3 — Xerox WorkCentre 5020

Code: U4-3

Description: FS1 Thermistor Defect. Thermistor FS1 cannot be monitored any more.
Remedy: Check the condition of the Fuser. The Fuser is installed properly. Y↓N→Install the Fuser properly. Check the resistance of the Thermistor. There is no open circuit between J601-1 ( P/J601) and J601-2, and the resistance is a minimum of 228k ohms (cold). Y↓N→Replace the Fuser (PL 5.1) . Check the wire between J408 ( P/J408) and P601 ( P/J601). The wire is not shorted or open. Y↓N→Repair the wire. Replace the Fuser (PL 5.1) and the AIOC PWB (PL 8.1) in that order.

← Xem tất cả mã lỗi Xerox WorkCentre 5020

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie