Code: 062-360
Description: Carriage Position Fail BSD-Reference: CH 6.2. Detected no input of Regi Sensor when carriage was working or detected the failure of the Regi Sensor position, or detected the failure of the IIT Regi Sensor level.
Remedy: Check that the Lamp Carriage can move freely and has no loose cables. The Lamp Carriage and cables are good. Y↓N→Repair the Lamp Carriage. Enter the Diagnostic Mode. Enter Component Control Code [62-212]. Check the operation of the IIT Regi Sensor. The Regi Sensor is good. Y↓N→Reseat the Regi Sensor connector. Check the wiring for proper operation and repair if necessary. Replace the Regi Sensor. (PL 10.6) Enter the Diagnostic Mode. Enter Component Control Code [05-22]. The Carriage moves in the scan direction. Y↓N→Check the connector of the Carriage Motor and repair if necessary. Replace the Carriage Motor. (PL 10.6) Replace the SLCC PWB (AIOC/Network PWB). (PL 8.1)