Code: C6-0
Description: No paper in the selected paper tray (Tray2). • No paper is detected in the STM when ATS function is disabled and STM is selected during a copy job. • No paper is detected in the STM when STM is selected during a print job (the paper size setting matches the one specified for the job).
Remedy: I/O Diagnostic Codes [07-08] STM No Paper Sensor
Check Items: • Press the [Stop] button on the Control Panel. • Load the correct paper into the STM. • STM No Paper Sensor dirty and Sensor Actuator deformed or damaged. • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the STM No Paper Sensor (PL 11.7) . – Wire between STM No Paper Sensor J171-3 ( P/J171) and STM PWB J542-3 ( P/J542) – Wire between STM No Paper Sensor J171-2 and STM PWB J542-4 – Wire between STM No Paper Sensor J171-1 and STM PWB J542-5 • Replace the STM PWB (PL 11.5) and the AIOC PWB (PL 8.1) .
Check Items: • Press the [Stop] button on the Control Panel. • Load the correct paper into the STM. • STM No Paper Sensor dirty and Sensor Actuator deformed or damaged. • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the STM No Paper Sensor (PL 11.7) . – Wire between STM No Paper Sensor J171-3 ( P/J171) and STM PWB J542-3 ( P/J542) – Wire between STM No Paper Sensor J171-2 and STM PWB J542-4 – Wire between STM No Paper Sensor J171-1 and STM PWB J542-5 • Replace the STM PWB (PL 11.5) and the AIOC PWB (PL 8.1) .