Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U4-2 — Xerox WorkCentre 5020DN

Code: U4-2

Description: Over Heat Temp Fail. A temperature of 250°C or higher was detected continuously for 480 ms.
Remedy: When U4-2 occurs, [NVM 50-20 FSR Reset FuserOverTemp] becomes "1." Run [NVM 50-20 FSR Reset FuserOverTemp] using "0" to reset it. Check the resistance of the Thermistor. There is no open circuit between J601-1 ( P/J601) and J601-2, and the resistance is a minimum of 228k ohms (cold). Y↓N→Replace the Fuser (PL 5.1) . Check the wire between J408 ( P/J408) and P601 ( P/J601). The wire between J408 and P601 is not shorted or open. Y↓N→Repair the wire. Replace the Fuser (PL 5.1) , the LVPS (PL 8.1) , and the AIOC PWB (PL 8.1) in that order.

← Xem tất cả mã lỗi Xerox WorkCentre 5020DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie