Code: U4-3
Description: FS1 Thermistor Defect. Thermistor FS1 cannot be monitored any more.
Remedy: Check the condition of the Fuser. The Fuser is installed properly. Y↓N→Install the Fuser properly. Check the resistance of the Thermistor. There is no open circuit between J601-1 ( P/J601) and J601-2, and the resistance is a minimum of 228k ohms (cold). Y↓N→Replace the Fuser (PL 5.1) . Check the wire between J408 ( P/J408) and P601 ( P/J601). The wire is not shorted or open. Y↓N→Repair the wire. Replace the Fuser (PL 5.1) and the AIOC PWB (PL 8.1) in that order.