Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U4-9 — Xerox WorkCentre 5020DN

Code: U4-9

Description: Fuser Fan Defect. After the start of Fan Fail Signal monitoring, the signal level was Low not more than 30 times.
Remedy: Turn the power ON. Visually check the NOHAD Fan (PL 9.2). The NOHAD Fan is rotating. Y↓N→Measure the voltage between the AIOC PWB P405-3 ( P/J405) (+) and GND (-). The voltage is approximately +24VDC. Y↓N→Replace the AIOC PWB (PL 8.1) . Replace the NOHAD Fan (PL 9.2) and the AIOC PWB (PL 8.1) in that order. Measure the voltage between the AIOC PWB P405-2 P/J405 (+) and GND (-). The voltage is 0. Y↓N→Replace the NOHAD Fan (PL 9.2) and the AIOC PWB (PL 8.1) in that order. Replace the AIOC PWB (PL 8.1) .

← Xem tất cả mã lỗi Xerox WorkCentre 5020DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie