Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U7-0 — Xerox WorkCentre 5020DN

Code: U7-0

Description: UI Communication TimeOut. At Power ON, the AIOC PWB does not communicate with the User Interface PWB.
Remedy: Measure each voltage between AIOC PWB J401-1 ( P/J401) (+), J401-2 (+), and GND (-). The voltages are approximately +5VDC. Y↓N→Replace the AIOC PWB (PL 8.1) . Check the wire between J401 ( P/J401) and J710 ( P/J710). The wire is neither shorted nor open. Y↓N→Repair the wire. Replace the User Interface PWB (PL 8.4) and the AIOC PWB (PL 8.1) in that order.

← Xem tất cả mã lỗi Xerox WorkCentre 5020DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie